Applications and Solutions
With RenovAction the design can be broadened, or changed to meet today’s design standards without destructive interventions on the structure. There are many reasons why: the need to meet current health code regulations, new design criteria; the need to change the filtration equipment and technology from a skimmer system to an overflow gutter technology.
1. The overflow gutter (case A)
As per the project requirements, the channel can be positioned by partial removal of the existing concrete gutter creating a recess for the placement and fixing of the Myrtha gutter. This solution does not cater for changes in the levels of the surrounding floor/pool deck. RenovAction can meet all different technologies for individual solutions: Ceramic 1 / Ceramic 2 / Classic / Structural.
2. The overflow gutter (case B)
Alternatively, the gutter can be positioned directly onto the pool deck, without any demolition/removal of the pre-existing concrete structure. However in this case, it becomes necessary to adjust the pool deck level at the back of the gutter, by placing a hob or step section in place behind the new Myrtha® RenovAction gutter.
The resultant increase in pool depth allows for a comprehensive renovation of the water circulation system, as there is enough space to install pipes and fittings necessary for return floor inlets, thus avoiding having to excavate to access the old pipes.
3. The recirculation systems
The new pipes are dipped in a 20 cm bed of gravel, covered in its turn by a light layer of concrete, smoothed and lined with the floor PVC, to guarantee its water tightness. This operation allows remarkable improvement in distribution of water in the pool passing from obsolete recirculation systems to the distribution from the floor with a sufficient number of inlet fittings.
4. Portholes and windowed walls
In the case of competition facilities originally equipped with portholes or windowed walls, RenovAction technology gives the possibility to maintain the same accessories also in the new project. In these cases the RenovAction panels are positioned in the original openings in the wall. Portholes and windows for the underwater shootings are installed on the panels with a special flange system.
5. Staircases and recessed steps
RenovAction guarantees the maximum adaptability to planning requirements in the case of recessed staircases and built-in steps, which are more in demand in most large facilities, both for competition and for communities. In the case of RenovAction recessed ladders, they are structured inside a panel that is installed exactly like the other panels: it will be enough to create in the existing wall of the pool, in correspondence with the ladder, a minimum lodgement for the projection of the steps towards the internal wall.
Like in the case of the safety recessed ledge, RenovAction panels can be directly supplied with the recessed step, installed inside the existing pool. It can be installed on one side as well as the entire perimeter of the pool.
6. Grabrails
RenovAction offers the possibility to combine various options and accessories within the same project by paying attention to each detail. An example of the excellent versatility of the technology is offered by inserting grabrails joint to the structural gutter. Myrtha’s technical department is ready to show you that Myrtha is the perfect solution.
